Hotpoint Dishwasher Error Codes: Flashing Light Problems

Posted on

Sometime Hotpoint dishwasher experience the errors which make it cannot work normally. When you get the error on your dishwasher, maybe you are very confused and panic with that problem. Unfortunately, there are errors codes which displayed through LED lights so it can help you diagnose exactly what the problem with your dishwasher.

In a case, if you do not know how to read the lights, well in this article we will explain each errors code. Besides we will also explain you how to fix it. Hotpoint dishwashers use the LED lights on the front display panel to show you once there is a problem with the machine. On several Hotpoint models, an LCD screen shows the error code. If your dishwasher has LED lights, you have to observe the blinking lights and find out what the means of that error codes.

In the text below, there are the lists of Hotpoint dishwasher error codes LED lights. So you can understand each error codes and find out the solution to fix it.

–          Error F01

It is anti flood overflow. The LED lights on your dishwasher are displaying in the below sequence.

  • LED 1: ON
  • LED 2: OFF
  • LED 3: OFF
  • LED 4: OFF

To fix it, you have to check if your machine’s drain system is not clogged.

–          Error F02

It is a water fill solenoid valve failure. The LED lights on your dishwasher are displaying in the below sequence.

  • LED 1: OFF
  • LED 2: ON
  • LED 3: OFF
  • LED 4: OFF

To fix it, you have to check if your fill valve is work properly or not.

–          Error F03

It is the failure of water drain. The LED lights on your dishwasher are displaying in the below sequence.

  • LED 1: ON
  • LED 2: ON
  • LED 3: OFF
  • LED 4: OFF

To fix it, you have to observe your machine once you open it. Then check if your drain is clogged.

–          Error F04

It is the Thermostat fault. The LED lights on your dishwasher are displaying in the below sequence.

  • LED 1: OFF
  • LED 2: OFF
  • LED 3: ON
  • LED 4: OFF

To fix it, you have to replace your thermostat so that the error F04 can be solved.

–          Error F06

It is a water fill timeout. The LED lights on your dishwasher are displaying in the below sequence.

  • LED 1: OFF
  • LED 2: ON
  • LED 3: ON
  • LED 4: OFF

To fix it, you have to check the supply of water to the machine and the sufficient pressure.

–          Error F07

VIDEO

It is the water turbine has damaged. The LED lights on your dishwasher are displaying in the below sequence.

  • LED 1: ON
  • LED 2: ON
  • LED 3: ON
  • LED 4: OFF

To fix it, you have to check if the turbine in the position properly. If you find an issue on your turbine, so you have to replace it.

Leave a Reply

Your email address will not be published. Required fields are marked *