Genie Garage Door Opener Red Light Blinking

Posted on

Genie Home Products is a manufacturer of America that provides home security products based in Alliance, Ohio. This company specializes in keyless, remote controlled garage entry systems. Do you use the product of Genie? If yes and then you experience problems with your Genie garage door opener, you do not have to worry about that because you can try to search the indication and do some steps to solve the problem. The issue is usually losing of door function or problems opening and closing the garage door. Here, we are going to know the basic sensor troubleshooting. You can see the indication from the red LED light and the green LED light. We also try to give you solution when you meet certain condition related to the red LED and green LED light.

If the Red LED light is on and it is solid, it means it is in a normal condition. Bu, how if it is off or blinking? We have the indication and solution in the list below.

  1. If the red LED light is off and the green is off too, it means the power head has not been powered. Or wiring from power head to sensor is bad. The solution is you have to check breakers, fuses and plugs. You also have to check wiring for obvious shorts.
  2. If the red LED light is off but the green LED light is on and solid, it means wiring to red LED is missing or bad. It also can happen because the power has been interrupted. The solution is you have to check wiring and remove power and reapply.
  3. If the red LED light has 2 blinks and pause (repeat) and the green light is on/solid, it means the beam is misaligned or obstructed. Or the sensor is defective. The solution is you have to check alignment of beam. Then, check for obstruction. Or you can call a professional technician.
  4. If the red LED light has 2 blinks and pause (repeat) but the green light is off it means the wire to sensor is missing or bad or sensor is defective. The solution is you have to check wiring or call a professional technician.
  5. If the red LED light has 3 blinks and pause (repeat) but the green light is on/ solid it means the sensor is receiving interference. The solution is you have to attempt to determine source of interference or call a professional technician.
  6. If the red LED has 4 blinks and pause (repeat) but the green light is on/ solid it means the Red LED is not sending pulses or Red LED is defective. The solution is you have to call the professional technician for both problem.

Well, if you meet problem with the red LED light and green LED light of your Genie garage opener, you can try to look for the indication by seeing the condition of the red LED and green LED light and then you can decide what solution that you have to take to solve the problem.

Leave a Reply

Your email address will not be published. Required fields are marked *