Frigidaire Dishwasher Error Codes

Posted on

One of the modern appliances that people have at home is a dishwasher. People do not want to spend a lot of time in the kitchen sink just for washing their dishes. Moreover, the existence of dishwasher is very helpful for them who are very busy with their activities and work. By using dishwasher they just need to turn on the machine and then their dishes will be clean automatically.

You may be one of the people who use dishwasher. If you use a modern dishwasher like Frigidaire dishwasher, there is error codes if something is going wrong. You can call a service technician if it happens. But, here we are going to explain about frigidaire dishwasher error codes so that you will know the indication when you experience something wrong with your dishwasher.

Frigidaire dishwasher has built in diagnostic system. If your dishwasher sees, finds or detects an error or a fault in the system , it will display an error or fault code. The error code will show where the usual numbers are on the display screen. When a code of error is showed, it means your dishwasher is telling you a specific fault. The error code will tell you which part on the dishwasher to check or replace.

Here, we provide the explanation of error codes of Frigidaire dishwasher.

  1. Codes related to vents. If there is a problem with the system of ventilation, Frigidaire dishwasher will show one of two error codes. A code of “uo” means that the vent is open. A code of “uf” stands for vent failure. If the Frigidaire dishwasher of yours show one of these codes, you can call your service representative to check the vent and vent fan.
  2. Switch and Sensor Failures. A Frigidaire dishwasher shows a number of codes that is related to switch or sensor failure. The most of the codes ask a service call because your service representative may have to replace a part. “Er”, “CL”, and “rA” refer to switch failures and “hs” and “tU” refer to sensor failure.
  3. Non-Error Codes. Several codes do not usually indicate technical problems even though you have to ask your technician to check the unit if you are in doubt. If the power to the unit fails, the dishwasher show “PF”. You are able to clear this code by opening and closing the door of your dishwasher. “HO” means the water is not warm enough and the dishwasher is waiting for it to heat before the machine proceeds to wash the dishes. You are able to run the faucet prior to starting a new cycle to ensure water is hot enough. “LO” means the dispenser is low on rinse aid solution and it needs to be refilled.

Well, that’s all the information about error codes of Frigidaire dishwasher. For your information, Frigidaire is the US consumer and commercial home appliances brand that is branch of European parent company Electrolux and it was founded in 1918. Thank you for reading this article. Hopefully, it will be informative.

Leave a Reply

Your email address will not be published. Required fields are marked *