Posted on

DRIVER_IRQL_NOT_LESS_OR_EQUAL is known as the error 0x000000D1. It is actually a Blue Screen of Death Windows Error. There are cause of DRIVER_IRQL_NOT_LESS_OR_EQUAL 0x000000D1 Error, such asIncorrectly configured, old, or corrupted device drivers, Corruption in Windows registry from a recent software change, Virus or malware infection which has corrupted Windows system files, Driver conflict after installing new hardware, Damaged system files after you have installed software, memory (RAM) corruption and a damaged hard disk.

If you experience the error code 0x000000D1, do you know how to fix it? Well, in this article we will explain you the methods to fix DRIVER_IRQL_NOT_LESS_OR_EQUAL 0x000000D1 Error. Actually, there are many solutions to fix DRIVER_IRQL_NOT_LESS_OR_EQUAL 0x000000D1 Error, such as by updating your drivers, rolling back your drivers, deleting damaged memory (RAM), using the troubleshooting steps, using the Device Manager to Upgrade Device Drivers and resetting your Virtual Memory Page File. In the text below, there are the methods to fix the error code 0x000000D1 step by step. Please read carefully to follow it.

Method 1: Using the troubleshooting steps.

  1. Please repair registry entries associated with error 0XD1.
  2. Then conduct a full malware scan of your PC.
  3. After that clean out your Temporary files and folders by using Disk Clean up.
  4. Please update your PC device drivers.
  5. Using Windows System Restore to undo recent system changes.
  6. Afterwards you can uninstall and reinstall the Windows Operating System Program Associated withDRIVER_IRQL_NOT_LESS_OR_EQUAL.
  7. Then run Windows System File Checker.
  8. Next please install all available windows Updates.
  9. Please check for Hard Drive Corruption.
  10. After that test your memory (Ram) for corruption.
  11. Do a clean installation of Windows.

Method 2: Using the Device Manager to Upgrade Device Drivers.

  1. Please press the Windows Key > type device manager > click Device Manager.
  2. From the Device Manager window please extend any category, then right click the name of the device.
  3. After that click “Update Driver Software”.
  4. Please wait for Windows to install the driver.
  5. Then repeat for the next device.

Method 3: Reset Your Virtual Memory Page File.

  1. Please click “Start” and right click on “My Computer”. Then select “Properties”.
  2. Under “Performance”, please click the “Advanced” tab and click the “Settings” button.
  3. Afterwards under “Virtual Memory”, please click the “Advanced” tab and click the “Change” button.
  4. Please write the numbers down if you have a custom setting.
  5. Then select “No paging file”. Click OK until all windows are closed.
  6. After that please restart your computer.
  7. Please click “Start” and right click on “My Computer”. Then select “Properties”.
  8. Click the “Advanced” tab in the System Properties window.
  9. Under “Performance”, please click the “Advanced” tab and click the “Settings” button.
  10. Under “Virtual Memory”, please click the “Advanced” tab and click the “Change” button.
  11. Then click “System managed size”. Correct the window to reflect your custom settings. Click OK until all windows are closed.
  12. The last please restart your computer.

Leave a Reply

Your email address will not be published. Required fields are marked *